Daikin FT18HEV1K Operation Manual And Installation Manual page 9

Remote control operation
Notice: This remote controller is for general use and can be used for multifunction air
conditioners. Some functions are not available on certain models, and even if the
corresponding button for such functions on the remote controller is pressed, the unit will
be operating at the current running status.
Remote controller
BLOW
BLOW button
• Press the BLOW button to turn the drying
function on or off.
When you press this button in Cool and
Dehumidifying mode BLOW appears to
show that the Blow function is on. When
the button is pressed again BLOW will
disappear and the Blow function will turn
off.
The default the Blow setting is OFF. When
operating the ON/OFF button, or switching
to Cool or Dehumidifying mode, the Blow
function setting will be kept. In Auto, Fan,
or Heat modes, BLOW does not appear
and the Blow function can not be set up.
TURBO
TURBO button
• In Cool or Heat mode, press this button
can turn on or turn off the Turbo function.
After turned on the Turbo function, its
signal will be displayed. When switching
the mode or changing fan speed, this
function will be canceled automatically.
8
Description of remote control functions
+
+ button
• Press this button to increase the preset
temperature. Press and hold this button for
more than 2 seconds will quickly increase
the increments of temperature. When the
button is released the current temperature
°C (°F) is shown. In Auto mode, the
temperature can not be set. Celsius
temperature range: 16-30°C. Fahrenheit
temperature range: 61-86°F.
–
– button
• Press this button to decrease the preset
temperature. Press and hold this button for
more than 2 seconds will quickly decrease
the increments of temperature. When the
button is released the current temperature
°C (°F) is shown. In Auto mode, the
temperature can not be set.
TEMP
TEMP button
• After the unit is powered on, the preset
temperature is displayed. If no icon is
shown on the remote controller, the preset
temperature is displayed.
When is displayed by pressing this
button, it indicates the preset temperature.
When is displayed by pressing this
button again, it indicates the indoor
ambient temperature. When
displayed by pressing this button one
more time, the currently displayed item will
be maintained.
If the remote controller is used to execute
other operations while the indoor ambient
temperature is displayed, the preset
temperature will be displayed once and
then the indoor ambient temperature will
be displayed after 5 seconds.
is