Daikin FT18HEV1K Operation Manual And Installation Manual page 10

Remote control operation
Notice: This remote controller is for general use and can be used for multifunction air
conditioners. Some functions are not available on certain models, and even if the
corresponding button for such functions on the remote controller is pressed, the unit will
be operating at the current running status.
Remote controller
SWING UP and DOWN button
• Press this button to set a desired swing
angle.
OFF
This is a universal remote controller. The
three kinds of swing status on main unit
are:
If the swing function is turned off when the
guide louver is swinging it will stop at its
current position.
The symbol indicates the guide louver
is swinging up and down in all five
positions.
Description of remote control functions
TIMER ON
TIMER ON button
• When this button is pressed, the
will disappear and the "ON" symbol will
blink. The displayed numbers will indicate
the Timer-On Setting status. While the "ON"
symbol is blinking for 5 seconds, set the
timer to the desired time by pressing either
the "+" or the "–" button.
Each time the button is pressed, the
number will increase or decrease by
1 minute. If the "+" or "–" button is pressed
for 2 or more seconds, the value will
change quickly in increments of 10 minutes.
After you finish setting the timer, press this
button again. If the timer setting is not
completed while the "ON" symbol is
blinking for 5 seconds, the setting will be
cancelled.
Before setting the timer, please adjust the
clock to the current time.
TIMER OFF
TIMER OFF button
• Press this key one time to enter the TIMER
OFF setup. The TIMER OFF icon will blink.
The setting procedure is the same as
TIMER ON.
symbol
9