Daikin FT18HEV1K Operation Manual And Installation Manual page 11

Remote control operation
(1) Turn the power on and press the ON/OFF button to start/stop
operation.
(Note: When the unit is powered off, the main unit's guide louver
closes automatically.)
(2) Press the MODE button to select a desired operation mode, or
enter COOL or HEAT operation modes directly.
(3) Press + or – button to set the desired temperature (not available
in AUTO mode).
(4) Press the FAN button to set the fan speed. (AUTO, LOW, MID,
HIGH)
(5) Press button to select the swing angle.
(1) Press SLEEP button to set to sleep mode.
(2) Press TIMER ON and TIMER OFF button to set the scheduled
timer ON/OFF.
(3) Press the LIGHT button to turn the LIGHT ON/OFF. (This function
is not available on some units.)
(4) Press the TURBO button to turn the TURBO function ON/OFF.
Blow function
After the unit is stopped, this function blows moisture off the indoor unit's evaporator to
prevent mould.
1. Blow function on: After turning off the unit, the indoor fan operates for about 10 minutes
at low speed. At this time, you can press the blow button to stop the indoor fan.
2. Having set blow function off: After turning the unit off by pressing the ON/OFF button, the
blow function will stop running.
AUTO RUN
When AUTO RUN mode is selected the temperature setting does not show on the LCD.
The unit automatically selects a suitable operation mode and adjusts to create a comfortable
ambient temperature.
Turbo function
The turbo function operates the fan at high speed to bring the ambient temperature up to the
preset temperature as quickly as possible.
10
General Operation
Options
Special functions
(1)
(3)
(4)
(4)
(1)
(2)
(5)
(2)
(3)