Table of Contents
Advertisement
B
N
S
ASIC
ETWORK
ETTINGS
6.3.1 Configuring PPPoE
Point-to-Point Protocol over Ethernet (PPPoE) is used mainly by ISPs that provide DSL modems to connect to the Internet.
Username
Enter the username assigned by an ISP.
Password
Enter the password assigned by an ISP.
Service Name
Enter the service name of an ISP
(optional).
MTU
Enter the maximum transmission unit (MTU). The
MTU specifies the largest packet size permitted for an
internet transmission (PPPoE default: 1492). The MTU
size can be set between 512 and 1492.
Authentication Type
provided by the ISP: Auto, PAP, or CHAP. If unsure of the
best setting, select Auto or check with your Internet Ser-
vice Provider.
Select the type of authentication
6-18
C
PPP
E
ONFIGURING
O
Advertisement
Table of Contents
