Configuring Pppoe - EnGenius X-TRA RANGE ESR600H Manual

B N S
ASIC ETWORK ETTINGS

6.2.4 Configuring PPPoE

Point-to-Point Protocol over Ethernet (PPPoE) is used mainly by ISPs that provide DSL modems to connect to the Internet.
Login Enter the username assigned by an ISP.

Password Enter the password assigned by an ISP.

Service Name Enter the service name of an ISP

(optional).
MTU Enter the maximum transmission unit (MTU). The

MTU specifies the largest packet size permitted for an
internet transmission (PPPoE default: 1492). The MTU
size can be set between 512 and 1492.
Authentication Type

provided by the ISP: Auto, PAP, or CHAP. If unsure of the
best setting, select Auto.
ESR600H/ESR750H
Select the type of authentication
6-17
C PPP E
ONFIGURING O
U G
SER UIDE