E
G
Q
S
N
ENIUS
UICK
TART
3.1 Connecting Network Cables
CAUTION!
!
U
NPLUG ALL PERIPHERALS AND THE ROUTER
1. Connect the adapter cable to an electrical outlet.
Note:
The Power LED lights up to show the device is active.
2. Plug one end of the Ethernet cable into the WAN port on the
back panel of the router. Plug the other end of the cable into
the cable or DSL modem.
'
S ADAPTER BEFORE STARTING WITH THIS PROCEDURE
Power LED
3-3
C
N
ONNECTING
.
C
ETWORK
ABLES