Troubleshooting; Measures Of Reducing Pollution - Qlink XF200 User Manual

Table of Contents

Advertisement

WARNING
Replace the air filter only, don t went to clean or wash it .
That will have some particle and damage with your engine .

Troubleshooting

If it is not able to start the engine, check the following items to find the cause.
1. Check if the fuel in the tank is sufficient.
2. Check if the fuel flows to the carburetor through the tap.
3. Disconnect the fuel hose from the carburetor, turn the tap to ON position, and check if gasoline flows out
of the hose.
4. Make sure the fuel has flown to the carburetor, then proceed to check the ignition system.
WARNING
When checking the fuel system, do it at a spacious area with no smoking.
1. Dismount the spark plug and reconnect it to the play cap.
2. Set the ignition switch to ON position, allow the ignition close to the engine
and start the engine . If the ignition system works normally, there is blue spark
jumping through the spark plug gap. If no spark appear, contact with the dealer
to have it repaired.
USER'S MANUAL
,
37

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Qlink XF200

Table of Contents