Riding On A Slope - Qlink XF200 User Manual

USER'S MANUAL
suitable gear under general condition. Never slide the clutch for the purpose of controlling the speed. Shift to
lower gears as necessary to get the engine working at normal speed.
CAUTION
The engine rotary speed at any gear should not exceed the red area of the tachometer.

Riding on a Slope

When the motorcycle runs upwards on a steep slope, it will slow down and demonstrates a lack of power. Now
shift to a lower gear so that the engine resumes normal operation. The action of gear shifting should be performed
swiftly; otherwise the motorcycle will lose the forward-rushing force.
When the motorcycle runs downwards along a slope, shift to lower gears so that the motorcycle can be braked
easily.
Bear in mind that the speed should not be too high in downward riding.
WARNING
If this is the first time for you to ride this type of motorcycle, make sufficient practice at a traffic-free area till
you fully get familiar with the operation of the motorcycle.
Before you start and stop the motorcycle, set the side stand to the normal upward position.
Never shift the gear or slow down at the time of turning. Before you start turning, decelerate to a safe speed.
Do not change to a lower gear during turning.
It is extremely dangerous to ride your motorcycle with a single hand. Hold the handlebars firmly with both hands.
19