Qlink XF200 User Manual page 11

USER'S MANUAL
¢Ú
Stop Switch of Engine
This switch, located on the top of the control panel of the right handlebar, it is of swinging plate type. Its shaft is
placed on the center of the plate. When it is on the " " position, the engine will start only after the circuit
closes up. This is an emergency switch.
If the switch is set on " ", the starter motor can not start and the starting circuit breaks completely.
¢Û
Throttle Grip
The grip is used to control the speed of the engine. Turn it anti-clockwise (towards yourself) to speed up,
conversely, turn it clockwise to slow down.
Electric start button ¢Ü
Hold both the front brake handle bar and the rear brake handle bar firmly, press the engine starter button so as
to start the electric starter and ignite the engine.
Lamp Switch ¢ Ý (with Dot version)
" "Position:
,
Turn on the meters lamp.
"¡ñ" position:
,
The meters lamp will get off.
8