Inspection Prior To Riding - Qlink XF200 User Manual

USER'S MANUAL
Let the Engine Oil Circulate before Riding
After the engine has been sta rted, no matter cold or warm, let the engine run at idle speed for an adequate period
of time before adding any load, so that the engine oil can flow to each of the important components.
To Carry Out the First Maintenance
The maintenance after the first 1,000km of mileage is of uttermost importance to your motorcycle. At the time
of running-in , all the components of engine are run in, and all the other parts are also engaged. All the necessary
adjustments, tightening and replacement of contaminated gear oil should be done in time.
The timely maintenance after the first 1,000km will contribute to a long lifetime and good performances.
CAUTION
The maintenance after the first 1,000km should be carried out in accordance with MAITENANCE SCHEDULE
of this manual. Pay special attention to the WARNING and CAUTION in the section.
Inspection Prior To Operation
Before starting to ride your motorcycle each time, check the items liste d below. Never underestima te the
importance of these checks.
15