Front Brake Lamp Switch; Muffler Pipe; Fuse - Qlink XF200 User Manual

WARNING
Do not drive the vehicle immediately after brake lining replacement. Apply brake for several times to make
the brake lining extended, restore the spring force and bring the brake fluid into circulation.

Front brake lamp switch

Front brake lamp switch is under the brake grip. Loosen the screw and move the
switch unit the lamp can be.
lit just before the grip is firmly pressed.

Muffler Pipe

The muffler of the motorcycle ridden for a long time is at a high temperature, so
do not touch it in order to protect you from scald.

Fuse

The fuse box is installed in the cover of left chassis. If some troubles occur in an
electric system, the fuse must be checked. If the fuse is burned out, the standby
one ( 15 A) in the fuse box will be replaced.
CAUTION
Use the fuse with designated amperes on replacement of a new. Never substitute
for the burned fuse with aluminum foil, copper wire, etc. If the new fuses are
burned out in a short time frequently, this shows there is the poss ibili ty of more
serious electrical trouble. Contact the dealer immediately for repairing.
USER'S MANUAL
30
( )
1
( )
2
( )
3