Table of Contents
Advertisement
3. Fold up the clamping levers (A) on the two
door hinges back to their initial position.
4. Close the oven door.
What to do if ...
Problem
The oven is not heating up
The oven lighting is not work-
ing
F11 appears in the time display The meat probe has short
F2 appears in the time display
A fault code that is not listed
here appears in the clock dis-
play
Switch the appliance off and then on again by screwing the fuse out and in or
actuating the circuit breaker in the fuse box. Contact the Customer Care Depart-
ment when the fault appears again.
Possible cause
The oven is not switched on
The required settings have not
been made
The fuse in the house's electri-
cal wiring (fuse box) has blown
The oven light bulb is faulty
circuited or the meat probe's
plug is not firmly in position in
the socket
Temperature inside the oven is
too high
Electronic fault
What to do if ...
A
Remedy
Switch on the oven
Switch on the oven
Check the fuse. If the fuses trip
repeatedly, please call an au-
thorised electrician.
Change the oven lamp
Insert the meat probe plug into
the socket on the side wall of
the oven as far as it will go
Let the appliance cool down
Switch the appliance off and on
again via the house fuse or the
safety switch in the fuse box.
Contact Customer Service if the
fault appears again.
41
Advertisement
Table of Contents
