EnGenius ENH500 User Manual page 38

Aggregation
Wireless Traffic
Shaping
Incoming Traffic Limit
Outgoing Traffic Limit
Accept / Cancel
1. Changing Wireless Advanced Settings may cause insufficient wireless connection quality.
Please remain all settings as default unless you have acknowledged all changing that you
have made.
2. Accept does not compile the changes, you must go to Status -> Save/Load to apply the
new settings. Please refer to the chapter 4.1 for more detail.
10% of the internet speed during the data transmission. For
example, the 802.11a/g's GI is 800us, the short GI will be 400us.
Aggregation is to merge the typical size of data's header to one
data. It is useful for the small size but larger amount packets.
Place a Check to enable Wireless Traffic Shaping function.
Specify the wireless transmission speed for downloading.
Specify the wireless transmission speed for uploading.
Press Accept to confirm the changes or Cancel to return previous
settings.