HP W1972al User Manual page 12

4. Slide the base away from the bottom of the monitor.
Figure 3-4 Sliding the base away from the monitor
5. Four threaded holes are exposed. These holes are for screws to attach the swing
6. Follow the instructions included with the mounting fixture to ensure that the
7. Attach a swing arm or other mounting fixture.
6
Chapter 3. Setting Up the Monitor
arm or other mounting fixture to the back of the monitor.
monitor is safely attached. The four threaded holes that are on the back of the
panel are compliant with the VESA standard for mounting flat-panel monitors.
ENWW