EnGenius EP802 User Manual page 9

10. Key-guard
a. When the keyguard is selected, all keys will be locked.
Press UNLOCK (Left) soft key followed by "＊" to release it.
b. The keyguard will be automatically enabled once returning back to
idle mode for 15 seconds.
11. Dialing Prefix
a. Up to 14 digits, including pause(s), one access code can be pre-
programmed to be added automatically in front of the dialed number
when dialing from call logs, phonebook, and dial-and-send dialing.
12. Call Hold
a. Places call on hold
13. Mute
a. Press MUTE (Left) soft key during talk, the handset microphone will
be muted.
Press UNMUTE (Left) soft key to release it.
14. Phonebook
a. 50 entries, each stores a phone number or handset ID (up to 26
digits) and name (up to16 characters)
b. Alphabetically sorted display and search by letter.
c. Dial from display.
d. During the stand-by mode, you can enter the phone book by
pressing scrolling key.
e. Phone book transfer via air
i. Transfer specific phonebook to one handset or all registered
handsets
ii. Transfer all phonebooks to one handset or all registered
handsets
15. Key tone
a. Four-level key tone volume selections (Off/Low/Medium/High).
b. Four key tone type selections.
16. Call Timers
a. Display call time duration for current call during and immediately
after the call.
17. Programmable Feature Call
a. Allow user to pre-program the most frequently used Feature code
into EP802 which is adjunct to the PBX system.
~17~
b. Up to 10 entries can be saved.
c. Once the feature code is being programmed, you can quickly
perform those functions during the call by pressing
18. Menu Display
a. To avoid mis-setup in the "Call Settings"(MENU-4), "Phone Settings"
(MENU-5), "Base Settings" (MENU-6) and Multi-base Setting
(MENU-7-3), these settings can be hidden.
b. Handset password is required before enter Menu Display (MENU-8),
the default handset password is "0000".
c. When disabling the settings, these setting will not displayed any
longer, unless enabled by entering Menu Display again.
19. PA On/Off
a. Enable or disable the broadcast function.
b. When PA is Off, the handset can't receive broadcast from base
station or other registered handsets; But it can broadcast to base
station or other registered handsets.
20. Group Setting
a. Allow handset to subscribe to one or several groups.
Re: Up to 9 groups (91~99) can be subscribed.
21. Custom Name
a. Allow changing the "EP802" screen to the desired wording or info,
such as the user's name.
Re: Up to 32 characters can be entered.
22. Change Pwd
a. Allow changing the handset password which requires entering in Call
Barring (MENU-4-3) and Menu Display (MENU-8) .
Re:Default is "0000".
23. DTMF Duration
a. From MENU-6-1 to select variable duration of DTMF tone.
b. Default is 100ms.
c. When entering the Base Settings, PIN is required. Default is "0000".
Re: Better to check with your phone company first before changing it.
OPTION soft key.
~18~