Using Daylight Saving Time - Citizen U60 Instruction Manual

W W 13. Using Daylight Saving Time
i To change automatically to daylight saving time by receiving the radio
wave
• By setting the daylight saving time reception setting in RX-S mode to AU, when the
radio wave is received, the time will be automatically updated with the daylight saving
time information of the received radio wave.
* The home city must be a city within the reception area.
* The timing for changing to daylight saving time can vary depending on the city or
region. There may be cases when the time is not changed on the appropriate date.
i To manually set daylight saving time
• To manually set daylight saving time, set the RX-S mode to mA, select the city in
TME mode (or WT-S mode), and set the daylight saving time setting to ON.
i To deactivate daylight saving time
• To deactivate daylight saving time, set the RX-S mode to mA, select the city in TME
mode (or WT-S mode), and set the daylight saving time setting to OF (off).
44
[Daylight saving time list]
Mode Setting item
reception setting
Daylight saving
RX-S time reception
setting
TME Daylight saving
WT-S time setting
* Refer to the explanations for each mode for details on the operations.
[What is daylight saving time?]
This is a time system where the clocks are put forward an hour during the summer, when the
daylight hours are longer.
Whether or not the system is used and the length of use differs between countries and regions.
To deactivate
Radio wave
To set manually daylight saving
AU mA
ON or OF (off) ON
time
mA
OF
45