Restoring Factory Defaults - Belkin N600 DUAL-BAND User Manual

RESETTING THE DUAL-BAND Wi-Fi RANGE EXTENDER

Restoring Factory Defaults

In some situations, it may be necessary to restore factory defaults;
this will restore the unit to the settings when you pulled it out
of the box. If you do this, you'll need to set it up again.
Dual-Band Wireless Range Extender
Restore Factory Defaults
Status
2.4Ghz Wireless Connection
Using this option will restore the extender to the factory (default) settings. Once in
5Ghz Wireless Connection
the default condition, the extender will need to be setup again.
Extended Networks Settings
SSID Settings
Security
Wi-Fi Protected Setup (WPS)
To setup after restoring the extender to the factory default state:
Utilities
1. Restore your extender to the factory defaults using the button on this page.
Restart Extender
2. Once the extender has rebooted and is blinking blue/amber, join belkin.setup.
3. Refresh this page in your browser.
Restore Factory Defaults
4. Follow the onscreen instructions to complete the setup.
Firmware Update
Administrator Password
Log
20
Restore Factory Defaults