Belkin N600 DUAL-BAND User Manual page 15

ADVANCED SETTINGS
Configuring the 2 .4GHz Wireless Connection
This option will change the settings for the Range
Extender's connection to your main 2.4GHz network.
You can use this option for the following tasks:
• Connecting to a different wireless network
• U pdating the settings after you've changed the wireless settings
(e.g., security type or password) on your Range Extender
Click on the "2.4GHz Wireless Connection"
link on the left side of the screen.
The Range Extender will provide the following options:
Network Name (SSID)
This is the name of the 2.4GHz network you wish to extend.
Security Type
You must specify the type of security for your Range
Extender (WPA2, WPA, WEP, or None).
Password (Key)
This is the password or passkey that you normally
use to connect to your wireless router.
Dual-Band Wireless Range Extender
2.4 Ghz Wireless Connection
Status
2.4Ghz Wireless Connection
Signal Strength
5Ghz Wireless Connection
Extended Networks Settings
Network Name (SSID)
SSID Settings
Security
Security Type
Wi-Fi Protected Setup (WPS)
Utilities
Password (Key)
Restart Extender
Restore Factory Defaults
Firmware Update
Administrator Password
Log
13
currentnetwork
WPA2
password
Obscure password
Clear Changes Apply Changes