Belkin N600 DUAL-BAND User Manual page 19

ADVANCED SETTINGS
Security
This screen enables you to change the wireless
security settings such as WPA or WEP.
We recommend leaving the settings you used when you went
through the Setup Wizard. By default, your Range Extender
will use the same security settings as your main network.
However, if you wish, you may specify different security settings
here. The screen is arranged in two columns, one for your
2.4GHz network and the other for your 5GHz network.
Security Type: You may specify the type of security here. Available
options are WPA2/WPA, WEP, and None (no security). We recommend
you use the same type of security as your main router.
Password (Key):
For WPA2 security, this can be any set of characters from 8 to 63
characters in length, (only accept printable ASCII characters). For
WEP security, this must be a string of "hex characters" (0-9 or A-F).
(If you specify "None" for the security, this field will be hidden.)
We recommend you use the same password as your main router.
Obscure password:
If this box is checked, the password will be obscured in your
browser so that others cannot see it when you type it in.
Dual-Band Wireless Range Extender
Security
Status
2.4Ghz Wireless Connection
5Ghz Wireless Connection
Extended Networks Settings
Security Type
SSID Settings
Password (Key)
Security
Wi-Fi Protected Setup (WPS)
Utilities
Restart Extender
Restore Factory Defaults
Firmware Update
Administrator Password
Log
17
2.4 Ghz 5 Ghz
WPA/WPA2 WPA/WPA2
Obscure Password Obscure Password
Clear Changes Apply Changes