Belt Or Brush Removal And Replacement - Vax Rapide XL Easy Manual

V-027M User Guide 7/9/06 15:00 Page 11
Emptying the dirty
water tank
7
22
Return dirty water tank to the base
of the cleaner by tipping the nozzle
down into the basin and dropping it
into place.
Belt or brush removal
and replacement
1
23
Remove dirty water tank and front
nozzle (see page 20) put them to
one side.
Lift the front of the cleaner base off
the carpeting with one hand. Line
up the black tabs with the grooves
of the front nozzle. Lift the front
nozzle upwards towards the
cleaner and press under the latch
until it locks into place.
Phillips screwdriver required
Use a Phillips screwdriver to
remove two (2) screws.
8
2
Remove the belt cover. Remove the
broken belt.
3