Sound; Sensors; Dashboard; Brightness - Mio Cyclo series User Manual

Sound

• On tap screen: Enable or disable the feedback sound
while tapping on the screen.
• Instructions: Enable or disable the sound while getting
instructions.

Sensors

Note: This setting option is for selected models only.
• Heart rate: Tap Rescan to scan and pair the heart rate
monitor manually.
• Cadence/Speed: Tap Rescan to scan and pair the
cadence/speed sensor kit manually.
Note: The check mark (
the monitor/sensor is connected successfully.
Once connected, the Heart rate icon (
icon ( ) will display in the title bar.
• Wheel circumference: Your cycling speed can be
calculated through the cadence/speed sensor only
when knowing the wheel circumference from where
the sensor is mounted.
Wheel size can be auto calculated by connecting the
sensor and cycling for a while. The calculated value
will be displayed in the field under the option.
You can also set the value manually. Disable the
option and then tap the value field to enter the
setting.
) next to the option indicates that
) / Cadence/speed
18

Dashboard

In the Dashboard Layout Change screen, you can change
the layout of the following screens:
• Information screen 1 & 2
• Navigation/Compass screen
• Workout screen
• History screen
To change the screen layout:
a. Tap the corresponding button in the Dashboard Layout
Change screen.
b. The number displayed at the bottom of the screen
indicates the data fields (e.g. speed, distance, time,
calories, etc.) included in the target screen.
c. Tap the numeric button and then select from the
available number of data fields to display.

Brightness

• Brightness: Drag the slider to the left to decrease the
screen brightness or to the right to increase the screen
brightness.
Tip: You can also decrease/increase the screen brightness by
tapping
• Backlight Timer: Tap the option to select how long
(from 15 seconds to Never) the display screen
remains lit after you press the POWER button.
• Suspend Timer: Tap the option to select how long of
inactivity (from 10 minutes to Never) will suspend the
device.
/ .