Welcome Thank you for purchasing this Mio. Please read this manual carefully before using your Mio for the first time. Keep this manual in a safe place and use as Important information for using the manual ..........2 your first point of reference.
Page 3
Workout mode For more information Workout by Distance ..................18 Online support ....................30 Workout by Time ....................19 Caring for your Mio ................... 30 Workout by Calories ..................19 Troubleshooting ....................31 Workout by HR Zone ..................19 What is GPS? ......................31 Workout by Power Zone ...................19 IPX7 ........................32...
Knowing your device ₃₁₀ ₃₁₅ ₅₀₀ ₅₀₅ Cyclo Main unit ₃₀₀ ₃₀₅ Cyclo Charge Indicator Indicates the level of internal battery charge: Green - battery full; Orange - battery charging. POWER button Turns your device on/off. POWER button Touch screen Turns your device on/off.
Accessories Your device comes with the following accessories. To use your device on a bike, ensure you use the specific bike mount kit that came with your device. Mio may Charging the battery provide optional accessories for specific models. Please visit Mio website (www.mio.com) for information.
Connection screen appears to prevent you from using your device. DO NOT delete any files that are pre-installed on the device. Deleting the files can cause the device to crash. Mio is not responsible for product 3. Follow the prompts to personalise your device, including: quality caused by file deletion.
Installing the device Follow the instructions in this section to mount the device and the cadence/ speed sensor kit (for selected models only) on your bike. In addition, you will need to put on the heart rate monitor during your workouts. Mounting the device on your bike The bike mount kit includes two types of rubber pads, allowing you to attach the bike mount to your bike securely.
Installing the sensors on your bike 3. When done, you can manually pair the sensor with your device by tapping Main menu > Settings > Sensors > Cadence/Speed. The cadence/speed sensor kit is used for selected models only. Information: 1. Follow the instruction below to install the cadence/speed sensor kit on your The cadence sensor contains a replaceable CR2032 battery.
Operating basics Adjust the elastic strap so it’s snug while you are putting it on. Ensure that you can take a good deep breath after putting on the strap. 3. Follow the instructions below to wrap the strap around your back, and then secure it on the other side with the buckle.
Using the touch screen Main menu To operate your device, touch the screen with your finger. You can perform the The Main menu is your starting place for various tasks, providing quick access to following actions: applications and settings. Tap a button to start a task or open another menu. •...
Page 11
The System icons NO. Icon Description Various System icons on the title bar at the top of the screen provide the status Recording status : The device is recording your trip/training. information of your device. Depending on your settings, the icons may be : Recording has been paused.
Viewing Dashboard screens Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, Note: The screenshots and other presentations shown in the following sections may differ with the closest matches appearing on the screen.
Starting navigation • On the Elevation screen, the device will analyse the route and display it as the elevation plot. Use the buttons upon the plot to zoom in/out and scroll through the plot. : Zoom in the plot Using the Navigate wizard : Zoom out the plot Your device is equipped with maps that provide street-level detail for to scroll...
Editing the Home location 4. From the Searching Result screen, you can do one of the following: • Tap GO to start navigating. 1. On the Home Address screen, tap 2. You can change the home location by searching for an address, POI, a • Tap and then tap Yes when prompted.
Searching for a location from the map screen You can set the destination simply by pointing to it on the map screen. Note: Tap the Sort by button at the bottom of the screen to change the sorting order of the entries: : by time;...
In the Navigation mode field, you can: Information: GPX (GPS eXchange Format) is a XML data format that allows you to transfer GPS data • Select the Bike navigation mode ( ) or Car navigation mode ( ) to (including waypoints, routes, and tracks) between your device and the computer. If plan your route.
Surprise Me™ Loop The device will generate the routes from your current location and the start/ end point will be the same as your current location. The device features the Surprise Me™ function that will offer you up to three exciting routes around your location.
Workout mode Cycling is a good aerobic fitness exercise that helps you to burn your calories, lose weight and increase your overall fitness. Workout mode of the device allows you to set workouts by entering your goals (Distance, Time, Calories) or conditions (HR Zone, Power Zone).
Workout by Time Workout by HR Zone Workout by Time is the perfect tool if you want to set how much time you Workout by HR Zone is available for selected models only. Connect the heart would like to spend on the workout. rate monitor to the device before you start this workout.
* The displayed items include: Total Distance, Total Calories, Total Ascent, Average Heart has been enabled. Rate, Average Active Speed, and Active Time. However, depending on your Mio model, certain items may not be available. Note: Once you enable the Indoor training mode, the routing/navigating function of the device (including Navigate and Surprise Me) will be disabled.
6. To update software, back up or restore your Cyclo device, right-click on the Mio Cyclo icon and then select the desired option from the pop-up menu. Note: You can also join your friend’s route by tapping Receive when invited.
Using WIFI (wireless local area network) Notes: • On the WIFI settings screen, tap Refresh to search the networks again. Note: This feature is not available on all models. • You can add a network manually by tapping Add Network on the WIFI settings You can synchronise data (e.g.
Pairing with your smartphone • To return to the previous screen, tap to minimize the screen. • To end the call, tap Note: This feature is not available on all models. Depending on your model, your Cyclo device can be connected with iPhone or Android phones.
Playing music When a connection is made, tap on the Main Menu to open the music Note: Depending on your Mio model, certain setting options may not be available. application. There are various customisation options available to enhance your navigation...
Profiles Dashboard The Profile entry screen displays the existing profile(s). In the Dashboard Layout Change screen, you can change the layout of the following screens: • You can set up to 6 profiles on the device. • Information screen 1 & 2 •...
Phone Tap the Phone option to turn on and off the Bluetooth function of the device. For more information, see the "Pairing with your smartphone" section. Note: For selected models only. Sensors WIFI sync This setting option is for selected models only. By Tap the WIFI sync option to turn on the WIFI function of default, the Cyclo device will automatically detect the the device.
Screen Shimano Di2 • Brightness: Drag the slider to the left to decrease the Note: For selected models only. screen brightness or to the right to increase the screen • Cassette model: Select the proper cassette model. brightness. • Cassette type: Select the proper cassette type. Note: You can also decrease/increase the screen brightness by Note: Set the lower value first, then the higher value.
Alerts • Custom: You can input the Maximum heart rate value manually. • On screen tap: Enable or disable the feedback sound while tapping on the screen. 2. Define the heart rate range in Zone 1 ~ 6 fields according to your personal training purpose. •...
Keyboard Compass The device provides Russian, Bulgarian, and Greek The Compass calibration function allows you to calibrate keyboard for local users. the built-in compass of the device. • From the Keyboard screen, tap on the keyboard you To calibrate the compass: want to use.
LCD panels may be used to help protect the screen from minor scratches. • Never clean your Mio when it is turned on. Use a soft, lint-free cloth to wipe the screen and the exterior of your Mio.
Mio. Charge the battery. • It is your sole responsibility to place, secure and use your Mio in a manner that will not cause accidents, personal injury or property damage. Always observe safe driving Screen responds slowly.
An IPX7 designation means that the unit withstands immersion in manufacturer. one meter (approx 3ft) of still water for up to 30 minutes. Mio guarantees this • The battery must be recycled or disposed of properly. grade provided the battery door and all jack covers are properly and securely closed.
0450804332, registered address in Zone 5 Mollem 318, 1730 Mollem, held and bodymounted wireless communication devices. Human models, Asse, Belgium, URL: eu.mitac.com (“Mio”) to be used only, as set forth below. instrumentation, and procedures. Procedure to determine the specific For any further information on Product or support, consult URL: www.mio.com/...
Page 34
Software and Documentation. Any liability of Mio, its suppliers and licensors towards you shall be void if any damage to the Product is caused by accident, transportation, neglect or misuse,...
Page 35
ENTIRE AGREEMENT: This Agreement sets forth the entire understanding and INTELLECTUAL PROPERTY RIGHTS: Mio or its suppliers or licensors, own agreement between you and Mio with respect to the Product, the Software and all intellectual property rights in and to the Product, the Software and the the Documentation, and supersedes all prior agreements and communications, Documentation, and any copies thereof.