Armrests - Invacare blade+ User Manual

5.3 ARMRESTS

B
C
A
The armrests can be removed for easier storage
and allow sideways transfer from the chair. They
can also be adjusted in height to suit the individuals
preference.
To adjust the height, the armrest lever (A) is lifted
up which allows the armrest to slide up and down,
within the armrest block (B). The armrest has an
adjustment collar (C) that works both as a stop for
the armrest and as a memory for the height used. It
can be adjusted by loosening the screw. When the
desired height has been achieved, lower the armrest
lever and push down/pull up the armrest until the
armrest drops into place.
To make sure that this has happened try to pull up/
push down the armrest, if it is located the armrest
should be "locked in", and the lever should be in its
down position.
Invacare Blade+
16