Table of Contents
Advertisement
4.1 DELIVERY CHECK
Any transport damage must be reported immediately
to the transport company. Remember to keep the
packaging until the transport company has checked
the goods and a settlement has been reached.
4.2 ASSEMBLY
When you receive your wheelchair, you must fit the
backrest, armrests and legrests onto the chair. The
assembly is simple and does not require any tools.
4.2.1 Backrest
When delivered, you might need to put the backrest in
place. Raise the top part of the backrest to an upright
position and make sure that the locking mechanisms
(A) are secure.
Now check that the backrest is secured firmly
in position!
12
4. Set-up and installation
A
4.2.2 Armrests
The armrests can be removed for easier storage and
allow sideways transfer from the chair. They can also
be adjusted in height to suit the individuals preference,
see page 16.
4.2.3 Rear wheels
A
Attach the rear wheels by pressing button (A) in the
centre of the hub whilst simultaneously sliding the
axle into the rear wheel position attachment of the
positioning plate.
It is very important that you check that the
locking pin (B) has actually locked the wheel
into position when the centre button has been
released. Take hold of the wheels and try to
detach them. This should NOT be possible.
B
Invacare Blade+
Advertisement
Table of Contents
