Invacare blade+ User Manual page 28

4. In order to be used as a seat during transport in
a vehicle, the wheelchair must be equipped with
a pelvic belt.
5. The vehicle's safety belt should fit as tightly across
the user's body as possible without discomfort.
The upper part of the safety belt should fit over
the user's shoulder as illustrated. No part of the
safety belt must be twisted.
6. The pelvic part of the 3-point safety belt must be
worn low across the pelvis so that the angle of
the pelvic belt is within the preferred zone (A) of
30° to 75° to the horizontal. A steeper angle is
preferred, but never exceeding 75°.
28
A
7. The backrest must be adjusted to an upright posi-
tion.
8. The 3-point safety belt must not be held away
from the user's body by parts of the wheelchair
such as armrests or wheels etc.
Incorrect
placement
of safety
belt
Invacare Blade+