Running Belt Alignment; Adjusting The Running Belt - True Z5.4 Owner's Manual

Chapter 5: Care & Maintenance

Running Belt Alignment:

Proper belt alignment allows the belt to remain centered and ensures smooth operation. Realigning the belt
takes a few simple adjustments. If you are unsure about this procedure, call the TRUE Service Department.
CAUTION:
adjusting or working near the rear roller. Remove any loose clothing and tie back your hair. Be very careful
to keep your ngers and any other object clear of the belt and rollers, especially in front of the roller and
behind the deck. The treadmill will not stop immediately if an object becomes caught in the belt or rollers.
The treadmill has adjustable rear feet. Make sure that the running surface is level. If the treadmill is placed
on an uneven surface, adjusting the rear feet can help, but will not compensate for extremely uneven
surfaces.
CAUTION: If you hear any cha ng or the running belt appears to be getting damaged, stop the running
belt immediately by pressing the STOP key. Contact the TRUE Service Department.
Walk around to the rear of the unit and observe the belt for a few minutes. The belt should be centered on
Important: Failure to align the belt may cause the belt to tear or fray, which may not be covered under

Adjusting The Running Belt:

If you are unsure how to adjust the running belt, call the TRUE Service Department
CAUTION:
Do not adjust the running belt when someone is standing on the unit.
Locate the right belt adjustment bolt in the rear end cap of the treadmill. To determine left and right, stand
at the rear of the treadmill and face the display. Make all belt adjustments on the right rear corner bolt using
a socket wrench.
running belt to the right.
Important:
damage the treadmill.
Recheck the alignment of the running belt by repeating the steps found above in RUNNING BELT
ALIGNMENT.
24
truefitness.com / 800.426.6570 / 1.636.272.7100