Tripp Lite SmartOnline 5kVA Owner's Manual page 22

Operation
(continued)
Output Settings
used to set the UPS's ability to work in the energy saving Economy Mode. When input voltage is in a + or - range of
ECO Mode:
10% of the overall voltage rating, the UPS will transfer into an Economy Mode to improve the efficiency of the UPS. From the
SETUP MENU screen, scroll DOWN
screen, and DOWN through the FREQ CONVERTER screen until you reach the ECO MODE screen. From here, press ON and now
i
you can scroll DOWN or UP
i
used to set the UPS's voltage protection. If enabled, and receiving AC power with input voltage and frequency within a
Industrial:
normal range the UPS will work in an On-Line mode. If the UPS detects an output voltage fluctuation more than 5 ms, the UPS will
transfer to Bypass Mode, returning to On-Line Mode when the output is back to normal. From the STARTUP MENU screen, scroll
DOWN until you reach the OUTPUT SETTING screen. From here, press ON to reach the OUTPUT VOLTAGE screen, and DOWN
i
until you reach the INDUSTRIAL screen. From here, press ON and you can now scroll DOWN
Press ON to save your selection. The DEFAULT is DISABLE. Scrolling DOWN from the INDUSTRIAL screen will take you to a
REDUNDANCY screen. From here, press ON and you can now scroll DOWN or UP for ENABLE or DISABLE. The DEFAULT setting is
DISABLE.
until you reach the OUTPUT SETTING screen. From here, press ON for the OUTPUT VOLTAGE
i
between DISABLE and ENABLE. Press ON to save your selection. The DEFAULT setting is DISABLE.
h
OUTPUT SETTING
ENT DOWN UP

To ENTER

OUTPUT SETTING
ENT DOWN UP

To ENTER

OUTPUT VOLTAGE
ENT DOWN UP


FREQ. CONVERTER
ENT DOWN UP


ECO MODE
ENT DOWN UP


OUTPUT VOLTAGE
ENT DOWN UP


FREQ. CONVERTER
ENT DOWN UP


ECO MODE
ENT DOWN UP


INDUSTRIAL
ENT DOWN UP


REDUNDANCY
ENT DOWN UP


22
*DISABLE*
ENT DOWN UP


ENABLE
ENT DOWN UP
or UP for ENABLE or DISABLE.
i h
*ENABLE*
ENT DOWN UP


DISABLE
ENT DOWN UP
*ENABLE*
ENT DOWN UP


DISABLE
ENT DOWN UP
i