Above-Floor Cleaning; With Floor Nozzles; Detachable Canister Mode - Shark NAVIGATOR LIFT-AWAY NV350UKMS Navigator Lift-Away NV350SL Owner's Manual

Above-Floor Cleaning

a
Fig. 15
Suction
Release Collar
CLEAN ABOVE THE FLOOR IN UPRIGHT VAC OR

DETACHABLE CANISTER MODE

1
Press the handle release button and pull the
handle up or press the extension wand release
button and pull the extension wand up.
2
Attach desired accessory onto the end of either
the extension wand or the handle. (Fig. 15)
3 Your vacuum has tremendous suction
power. Adjust the amount of suction with
the suction release on the handle. Open
the valve (a) by rotating the collar 90˚
counterclockwise for low suction when
doing light jobs such as drapes or fine
surfaces. Close the valve (a) by rotating
the collar clockwise 90˚ for high suction
and when using the hand held turbo brush.
(Fig. 15)
4
Press the On/Off switch to the "I" position to turn
the vacuum on for above-floor cleaning.
IMPORTANT: Ensure vacuum is in upright
position. Do not use position "II" when cleaning
above the floor in the upright vac mode as this
will engage the motorized floor brush. The
rotating brush may damage your floor if run for a
prolonged period of time in one area.
NV350UKMS_26_IM_ENG_120906_1.indd 11

With Floor Nozzles

Release suction
for easier push &
pull on high pile
carpets and area
rugs.
CLEAN THE FLOOR IN DETACHABLE CANISTER
MODE
1
2
3
Fig. 16
Press the extension wand release button and pull
up.
the extension wand
A
ttach the floor nozzle onto the end of the
extension wand. (Fig. 16)
Pr
ess the On/Off switch to the "I" position to turn
on.
the suction motor
NOTE: The rotating brush will not rotate in
Detachable Canister mode.
HELP LINE: 0844 873 0728
English
11
12-09-06 2:59 PM