Setting Alert Mode; Receiving And Reading Messages - Sun Telecom ST800 User Manual

9.

SETTING ALERT MODE

Enter this mode to select the different type of alerts:
Standard Tone
Press the FUNCTION button and hold for at least 2
< Fig.9a >
seconds to enter the function menu mode. Press the
FUNCTION button to scroll through the menu prompt
until the "SET ALERT?"
READ button to enter the set alert mode(Fig 9b).
< Fig.9b > Press the READ button twice to scroll though the
choice alerts available.
Beep1/Beep2/Beep3/Beep4/Melody1/Melody2/
Melody3/Chirp/Silent
In the silent mode, the pager continues to receive
messages but will not emit an alert to prompt the user.
Press the FUNCTION button to select the desired alert.
The pager will return to standby.
Melody Chirp Silent
is displayed(Fig.9a). Press the
.
SETTING ALERT MODE
10.

RECEIVING AND READING MESSAGES

The pager will emit an audible alert or
vibrate(depending on the alert setting mode)
when a message is received. The pager will
< Fig.10a >
also display the number of unread messages.
If there are two unread messages, the pager will
display as <Fig.10a>.
Press the READ button to display the first
< Fig.10b >
message(Fig.10b).
Press the READ button to advance to the
display the message arrival time(Fig.10c).
< Fig.10c >
If no message is received, pressing the READ
button will cause the pager to display as
<Fig.10d>.
< Fig.10d >
RECEIVING AND READING MESSAGES