Setting The Time And Date; Setting Vibration/Audible Alert - Sun Telecom ST800 User Manual

7.

SETTING THE TIME AND DATE

Press the FUNCTION button and hold for at least 2
seconds to enter the function menu mode.
Press the function button to scroll through the
menu prompts until the "SET TIME ?"prompt is
displayed.
< Fig.7a >
Press the READ button to enter the set time mode.
The pager will first display a blinking field for the
year.
Press the READ button to set correct year(Fig.7a).
Press the FUNCTION button to move to the date
< Fig.7b >
and time field(Fig.7b).
Press the READ button to set the digits for each
field.
Complete each field(hour, minute & AM/PM) in
the same manner. The pager returns to standby
upon completing all the fields.
SETTING THE TIME AND DATE
8.

SETTING VIBRATION/AUDIBLE ALERT

You can select the alert mode to vibrate or to
produce an audible tone. Within the standby screen,
press the FUNCTION button for at least 2 seconds
< Fig.8a > to enter the function menu mode.
The pager will display either <Fig.8a> of <Fig.
8b> depending on the initial state of the alert mode.
Press the READ button to select the audible or
< Fig.8b >
vibration mode.
In the audible mode, the pager will display the
speaker icon
No speaker will be displayed in the vibration mode.
SETTING VIBRATION/AUDIBLE ALERT
.