Flexible Arm Installation - NEC MultiSync LCD2470WVX User Manual

5. Remove the stand (Figure S.4).
6. Remove the 2 screws on the top of the monitor (Figure S.5).
The monitor is now ready for mounting in an alternate manner.
7. Connect the cables to the back of the monitor.
8. Reverse this process to re-attach stand.
NOTE: Use only VESA-compatible alternative mounting method.
Handle with care when removing stand.

Flexible Arm Installation

This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:
1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.
2. Using the 4 screws to attach the arm to the monitor (Figure F.1).
NOTE: The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements, the
monitor must be mounted to an arm, which guaranties the necessary stability under consideration of the weight of
the monitor.
12 mm
M4
4 x 12mm with lock
washer and flat washer
Figure S.4
Thickness of Bracket (Arm)
100 mm
Figure F.1
2.0~3.2 mm
4 Screws (4M)
(Max Depth: 14 mm)
100mm
English-8
Figure S.5
Weight of LCD assembly: 8.3 kg MAX (LCD2470WNX)
8.3 kg MAX (LCD2470WVX)