Installing Your Refrigerator; Selecting The Location; Cabinet Clearances; Leveling Legs - Rangemaster RBC38 Installation, Operation And Maintenance Instructions

Refrigerated beverage centre with microsentry refrigeration monitor
Table of Contents

Advertisement

INSTALLING YOUR BEVERAGE CENTRE
Select Location
The proper location will ensure peak performance of your
appliance. We recommend a location where the unit will
be out of direct sunlight and away from heat sources. To
assure your product performs to specifications the recom-
mended installation location temperature range is from
18 to 27°C for indoor built in units, 18 to 32°C for indoor
freestanding units, and 4 to 38°C for outdoor units.
Cabinet Clearance
Ventilation is required from the bottom front section of the
unit. Keep this area open and clear of any obstructions.
Adjacent cabinets and counter top can be installed around
the unit as long as the grille and door access remain unob-
structed.
Front Grille
Do not obstruct the front grille. The openings within the front
grille provide air to flow into and exit from the refrigerator
condenser. For this reason it is important this area to not be
obstructed and be kept clean. Rangemaster does not recom-
mend the use of custom made grilles as air flow may be
restricted because of inadequate openings. (See Figure 1).
3

Leveling Legs

Adjustable legs at the front and rear corners of the unit
should be set so the unit is firmly positioned on the floor and
level from side to side and front to back. Turn leveling legs
clockwise to raise unit, counterclockwise to lower it. (See
Figure 1).
Figure 1
Front Grille,
keep this
area open.
Leveling Legs

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rbc60

Table of Contents