HP RP7 7800 Specification page 15

QuickSpecs
Standard and Configurable Components
STORAGE
Size
2.5"
Drive Bays
2 (See below for RAID capabilities)
OPTIONS:
SATA Hard Drives
500GB 7200 RPM SATA ,3.0 Gb/s 2.5"
320 GB 7200 RPM SATA 3.0 Gb/s, 2.5"
Solid State Drives
32 GB SSD, 2.5" (RAID not supported)
64 GB SSD, 2.5" (RAID not supported)
128 GB SSD, 2.5"
256 GB SSD, 2.5"
REDUNDANT ARRAY OF INDEPENDENT DRIVES (RAID)
Flexible implementation:
DriveLock is supported while in RAID mode. Users can manage the DriveLock password from within F10 Setup. Locked
drives will be displayed as such in the RAID option ROM interface.
Hard drive information can be viewed within F10 Setup while in RAID mode. Previously, the hard drives will not appear
in Drive Configuration when switching to RAID mode.
DPS Self Test can be executed on physical hard drives while in RAID mode.
The RAID Setup Utility (accessed through CTRL-I) can be protected by the F10 Setup password.
NOTE: RAID 1 is the only RAID configuration offered via factory configurations. RAID is not supported on the 32GB SSD or the
64GB SSD. The pre-configured systems:
Are complete RAID systems and have both drives installed.
Have the necessary Option ROM configuration.
Are pre-loaded and pre-installed with all required Intel software.
Include a preinstalled operating system that is mirrored mode out of the box.
Please refer to the HP White Paper titled "Advanced Host Controller Interface (AHCI) and Redundant Array of Independent
Disks (RAID) on HP Compaq PCs" at: http://www.hp.com
DA - 14350 North America — Version 15 — February 10, 2014
HP RP7 Retail System, Model 7800
for more information and instructions.
Page 15