Supervisor Engines - Cisco CAtalyst 4500 Series Installation Manual

Chapter 1 Product Overview
Table 1-5 Supervisor Engine Features (continued)
Feature
RMON
2
SPAN
Performance management
Hot-swappable
Gigabit Ethernet (using a
GBIC or SFP)
10-Gigabit Ethernet
(WS-X4516-10GE and
WS-X4013+10GE)
Forwarding
Supervisor Engine II
Supervisor Engine II-Plus
Supervisor
Engine II-Plus TS
Supervisor
Engine II-Plus 10GE
Supervisor Engine III
Supervisor Engine IV
78-14409-08
Description
The first four groups (Ethernet statistics, Alarms, Events, and History)
are on a per-port basis without an optional RMON processing module
Supported, which allows you to redirect traffic from any port or VLAN
to a SPAN destination port
Information provided
Supported. On non-redundant systems, packets are not forwarded while
the supervisor engine is removed, and a system reboot occurs when a
supervisor engine is reinserted.
Includes two (four on WS-X4516-10GE and WS-X4013+10GE) Gigabit
Ethernet (1000BASE-X) interfaces for backbone interconnection of
high-performance switches and routers
Includes two 10 Gigabit Ethernet interfaces for backbone
interconnection of high-performance switches and routers
Layer 2, 3, and 4 forwarding (Cisco IOS only)
24-Gbps, 18 Mpps full-duplex Gigabit Ethernet switching engine
64 Gbps, 48 Mpps (with Catalyst 4506 and 4507R, or 28-Gbps, 21 Mpps
with Catalyst 4503) full-duplex Gigabit Ethernet switching engine
64 Gbps, 48 Mpps (with Catalyst 4503 only) full-duplex Gigabit
Ethernet switching engine
108 Gbps, 81 Mpps full-duplex Gigabit Ethernet switching engine
64 Gbps, 48 Mpps (with Catalyst 4506 and 4507R, or 28-Gbps, 21 Mpps
with Catalyst 4503) full-duplex Gigabit Ethernet switching engine
64 Gbps, 48 Mpps (with Catalyst 4506 and 4507R, or 28-Gbps, 21 Mpps
with Catalyst 4503) full-duplex Gigabit Ethernet switching engine
Catalyst 4500 Series Switches Installation Guide

Supervisor Engines

1-21