Management Flow - Cisco CAtalyst 4500 Series Installation Manual

System Architecture

Management Flow

Figure 1-22 Management Flow
PS1
Fan
tray
Backplane
Catalyst 4500 Series Switches Installation Guide
1-48
Catalyst 4503 with a single 15A circuit. Likewise, it is possible to deploy a fully
populated Cisco Catalyst 4510R with two 20A and one 15A circuits rather than a
single 60A connection, which often requires rack rewiring.
Figure 1-22 shows management and status information flow through the system.
PS2
Each system component has an EEPROM that identifies it to the supervisor
engine over a serial connection on the backplane, which also passes along
information like temperature, fan speed, power draw per slot and port, and port
activity. LED status information is also sent to the supervisor engine, which
makes it available to an administrator through a terminal connection or
management software.
All Catalyst 4500 series switches support:
• Hardware-based multicast-Protocol Independent Multicast (PIM).
Internet Group Management Protocol (IGMP).
•
Supervisor engine
Switching module
Switching module
Terminal
Chapter 1 Product Overview
78-14409-08