Regency 200 Series User Manual page 9

User's Guide
Programming The Telephone
Retrieving Messages
Message Retrieval Feature
1 If you lift the handset to make a
call, and you hear an interrupted
dial tone, this means you have a
message in the voice mail
(Message Manager).
2 Press the Message Retrieval Button
to automatically call your voice
mail (Message Manager).
Note: The Message Retrieval Button
must be programmed before messages can be retrieved. See
page 10 for programming instructions.
Speed Dial Programming
The Regency 200 features 5 speed dial locations convenient for
dialing frequently used telephone numbers. Each speed dial
location can store up to 32 digits.
Prgramming Notes:
For program understanding, read
these notes before beginning the
programming process.
1 Speed dial programming must
be done with the telephone
plugged into the telephone line.
2 Telephone programming should
be performed with the telephone off-hook.
Regency™ Series 200 Single Line Telephone
11
User's Guide
Connection Points
This table explains the labels in the diagram:
CONNECTION FUNCTION
POINT
Data port Convenient port for connecting a computer,
modem, base station for a cordless phone, fax
or answering service.
Note: A safety plug found inserted in the data
port must be removed before use.
Handset jack Modular receptacle for connecting the handset
coil cord.
Line cord Modular receptacle for connecting telephone
receptacle line cord.
Regency™ Series 200 Single Line Telephone
4