Learning About The Function Keys - Regency 200 Series User Manual

User's Guide
Programming The Telephone
Ringer Volume
The switch used to adjust the ringer volume is located on the right
side of the telephone base. To adjust the loudness of the ringing,
slide the switch to the desired position of HI, LOW or OFF. The
factory sets the ringer volume to the HI position.
Regency™ Series 200 Single Line Telephone
13
User's Guide

Learning about the Function Keys

Low profile design, hearing aid
compatible.
Hold Key
Used to place caller on hold.
Regency™ Series 200 Single Line Telephone
Speed Dial Keys
Used to dial frequently called numbers
from programmed memory.
Index Card
Used for listing stored caller information
for speed dial.
Store Key
Used for storing memory locations.
Redial/Pause Key
Redials the last number dialed. Pause
is used to program a 3 second delay
in speed dialing.
Flash Key
Provides a 600ms timed line break.
Useful to retrieve call-waiting calls.
Numeric Dial Pad
Large keys used for outbound dialing
and programming memory locations.
Handset Volume Control Key
Controls the loudness of the handset
when off hook.
In Use Light
Shows the line is in use when illuminated.
Message Retreival Button
Press to retrieve voicemail messages
(if you subscribe to Message Manager).
2