Connection Points - Regency 200 Series User Manual

User's Guide

Connection Points

Right side
Left side
Handset Jack
Line Cord Connector
Rear
See chart on page 5 for description of connection points.
Regency™ Series 200 Single Line Telephone
3
Data Port
User's Guide
Programming The Telephone
Programming a Speed Dial Key
1 While in 'OFF HOOK' state, press the STORE key.
2 Using the keypad, enter the number to be stored.
3 After entering the number, press the 'Speed Dial Key' location
to store the number. The number for that location is now
stored.
4 To exit, place the phone handset on base (ON HOOK).
5 To delete an incorrect entry, repeat steps 1, 3 and 4.
Placing a Call from a Speed Dial Location:
1 Lift the handset.
2 Press the Memory Location Key to dial the number.
Regency™ Series 200 Single Line Telephone
12