Cleaning Of Front Panel - Hitachi RAF-25NXA1 Instruction Manual

2. HOW TO INSTALL AND REMOVE THE FRONT PANEL
• Be sure to use both hands to grasp the front panel when removing it or attaching it.
Removing
1 Press at the top left and right corners of the front
panel.
Attaching
1 Attach three front panel bearings to the axis of
the front cover. (Set the hook to face up.)

3. CLEANING OF FRONT PANEL

The front panel can be washed in water. It can be kept clean at all times.
• Front panel can be removed and washed in water. Gently clean the
front panel using a soft sponge.
• When the air conditioner is to be cleaned without removing the front
panel, clean both the body and remote controller with a dry soft cloth.
• Wipe off water completely. If water remains on the display section or
light receiver section, this could cause a malfunction.
CAUTION
• Do not splash or direct water to the body of the unit when cleaning it as this may
cause short circuit.
• Never clean with hot water (above 40°C), benzine, gasoline, acid, thinner or a
brush, because it will damage the plastic surface and the coating.
4. MAINTENANCE AT BEGINNING OF LONG OFF PERIOD
• Activating air conditioner drying will keep the interior of the indoor unit
dry and prevent mold formation.
• Turn off the circuit breaker.
2 Grasp the left and right sides of the front panel
and pull it up to remove.
2 Close the front panel.
Air blow
– 18 –
A
C
I
D