How To Set The Sleep Timer - Hitachi RAF-25NXA1 Instruction Manual

HOW TO SET THE SLEEP TIMER

Set the current time at first if it is not set before (see the pages for setting the current time).
Press the (SLEEP) button and the display changes as shown below.
SLEEP
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the
button.
The (RESERVED) sign goes out with a beep and the
NOTE
If you set the sleep timer when the off-time or on/off
timer has been set earlier, the sleep timer becomes
effective instead of the off - or on/off-timer set earlier.
Mode
1 hour
Sleep Timer
Sleep Timer: The device will continue working for the desired number
of hours and then turn off.
Point the signal window of the remote controller toward the indoor unit,
and press the SLEEP button.
The timer information will be displayed on the remote controller.
The TIMER lamp lights with a beep from the indoor unit. When the
sleep timer has been set, the display indicates the turn-off time.
AM
The device will be turned off by the sleep timer
Sleep
Start
and turned on by on-timer.
timer
1
Set the ON-timer.
2
Press the (SLEEP) button and set the sleep timer.
AM
AM
(TIMER) lamp turns off on the indoor unit.
– 14 –
Indication
2 hours 3 hours
Sleep timer off
Example: If you set 3 hours sleep time
at 11:38 p.m., the turn-off time is
2:38 a.m..
For heating:
In this case, the device will turn off in 2
hours (at 1:38 a.m.) and will turn on
early so that the present temperature
will be almost reached at 6:00 a.m. next
morning.
(CANCEL)
7 hours