Table of Contents
Advertisement
See Grill Cooking Guide on page 12.
You can enjoy delicious grilled
food year 'round, prepared in the
convenience of your own kitchen.
H
the
OW
Step 1: Position the Grease
Collector in the cooktop burner
box space provided. Remove
grease from Grease Collector after
each use.
Step 2: Fit Grill Pan in cooktop
over Grease Collector. The hole in
center of Grill Pan permits grease
to drain into collector. Keep hole
open at all times.
Grills
grates)
Step 3: Place Grill Spatter Shield
in bottom of Grill Pan. This shield
prevents spattering and flash fires
during grilling.
Step 4: Make sure all controls are
turned to OFF. Hold Heating Unit
with terminals facing rear of the
Cooktop and level with the surface.
Insert terminals into Cooktop
receptacle as far as they will go.
(Do not force). Heating Unit should
rest on ledge of the Grill Pan.
Step 5: Place the 2 Grill Grates on
the Grill Pan over the Heating Unit.
Grates should be seated properly on
Grill Pan or grease will leak between
Grill Pan lip and main top and build
up in burner box area.
10
Removing (.;rili Element
When removing the parts of the
Grill module to clean, be sure all
switches are in the OFF position
and unit is cool. Remove the 2 Grill
Grates and then slide the Heating
Unit to the front until unplugged.
Remove Grill Spatter Shield, Grill
Pan and Grease Collector.
The control knob must be pushed
in to start; this prevents heating unit
from being tur~ed on accident~lly.
Push the knob in only when it is in
the OFF position. When the knob
is in in any other position, it can be
turned without pushing it in.
Push in control knob depending
on which side of cooktop Grill
Module is used. The right front
control knob controls the grill
when module is on the right side
and left front control knob
operates grill when Grill Module is
on left side of cooktop.
Turn knobs to the heat setting
you want.
Advertisement
Table of Contents
