Grill Module - GE P385 Use And Care & Installation Manual

CAUTION
• Never cook directly on the glass.
SURFACE
Always use cookware.
COOKING
• Always place the pan in the center of
OFF CENTER
the surface unit you are cooking on.
Plastic and Sugary Spillovers
Sugary spillovers (such as jellies, fudge, candy
syrups) or melted plastics can cause pitting of the
surface of your module (not covered by the warranty)
unless the spill is removed while still hot.
You can enjoy delicious grilled food year 'round,
prepared in the convenience of your own kitchen.
Separate heating elements can be set at different
temperatures, allowing you to use half the cooking
surface to grill meat and the other half to prepare
potatoes or other vegetables, for a complete meal.
How to Insert the Grill Module
1. Make sure the grease
2. Fit the reflector pan in the
14
RADIANT MODULE

GRILL MODULE

collector jar is in place
beneath the cooktop.
cooktop. The slots in the
pan permit grease to drain
into the jar. Keep the slots
open at all times.
(continued)
DRAGGING
CUTTING
Special care should be taken when removing hot
substances. Follow the instructions in the Care and
Cleaning section carefully.
• Do not slide cookware across the
cooktop because it can scratch
the glass—the glass is scratch
resistant, not scratch proof.
• Do not use the surface as a
cutting board.
3. Make sure all controls are turned
to OFF. Hold the heating element
with the plug facing the side of
the cooktop and level with the
surface. Insert the plug into the
cooktop outlet as far as it will
go. (Do not force.) The heating
element support should rest on
the ledge of the reflector pan.
4. Place the grill grate on
the reflector pan over the
heating element. The grate
should be seated properly
on the reflector pan.