Orion XTRPRO102 Owner's Manual page 7

Two dual 4 ohm voice coil woofers with voice coils in parallel and the two woofers in
parallel results in a 1 ohm load to the amplifier.
-
+
Figure 5
Figura 5
Abbildung 5
1. Connect the speaker in parallel by connecting the four positive (+) terminals
together and the four negative (-) terminals together.
2. Wire the positive (+) terminals of the woofers to the positive (+) terminal on
the amplifier. Wire the negative (-) terminals of the woofers to the negative (-)
terminal on the amplifier.
6
-
+
- -
+
+
© 2010 directed electronics—all rights reserved
+
-