Kohler Command CV17 Service Manual page 16

Tools and Aids
TOOLS
Description
Hydraulic Valve Lifter Tool
For removing and installing hydraulic lifters.
Ignition System Tester
For testing output on all systems, including CD.
Inductive Tachometer (Digital)
For checking operating speed (RPM) of an engine.
Offset Wrench (K and M Series)
For removing and reinstalling cylinder barrel retaining nuts.
Oil Pressure Test Kit
For testing/verifying oil pressure on pressure lubricated engines.
Radiator Tester
For pressure testing radiator and cap on Aegis liquid-cooled engines.
Rectifi er-Regulator Tester (120 volt current)
Rectifi er-Regulator Tester (240 volt current)
For testing rectifi er-regulators.
Components of 25 761 20-S and 25 761 41-S
CS-PRO Regulator Test Harness
Special Regulator Test Harness with Diode
Spark Advance Module (SAM) Tester
For testing SAM (ASAM and DSAM) on engines with SMART-SPARK
Starter Servicing Kit (All Starters)
For removing and reinstalling drive retaining rings and brushes.
Individual component available:
Starter Brush Holding Tool (Solenoid Shift)
Triad/OHC Timing Tool Set
For holding cam gears and crankshaft in timed position while installing timing belt.
Valve Guide Reamer (K and M Series)
For properly sizing valve guides after installation.
Valve Guide Reamer O.S. (Command Series)
For reaming worn valve guides to accept replacement oversize valves. Can be used
in low-speed drill press or with handle below for hand reaming.
Reamer Handle
For hand reaming using Kohler 25 455 12-S reamer.
Valve Guide Service Kit (Courage, Aegis, Command, OHC)
For servicing worn valve guides.
AIDS
Description
Camshaft Lubricant (Valspar ZZ613)
Dielectric Grease (GE/Novaguard G661)
Dielectric Grease
Kohler Electric Starter Drive Lubricant (Inertia Drive)
Kohler Electric Starter Drive Lubricant (Solenoid Shift)
RTV Silicone Sealant
Loctite ® 5900 ® Heavy Body in 4 oz. aerosol dispenser.
Only oxime-based, oil resistant RTV sealants, such as those listed, are approved
for use. Loctite ® Nos. 5900
characteristics.
Spline Drive Lubricant
16
® or 5910 ® are recommended for best sealing
KohlerEngines.com
Source/Part No.
Kohler 25 761 38-S
Kohler 25 455 01-S
Design Technology Inc.
Kohler 52 455 04-S
Kohler 25 761 06-S
Kohler 25 455 10-S
Kohler 25 761 20-S
Kohler 25 761 41-S
Design Technology Inc.
Kohler 25 761 40-S
.
™
SE Tools KLR-82411
SE Tools KLR-82416
Kohler 28 761 01-S
Design Technology Inc.
Kohler 25 455 12-S
Design Technology Inc.
SE Tools KLR-82415
Source/Part No.
Kohler 25 357 14-S
Kohler 25 357 11-S
Kohler 52 357 01-S
Kohler 52 357 02-S
Kohler 25 597 07-S
Loctite
Loctite
Loctite
Kohler 25 357 12-S
DTI-110
DTI-031
DTI-033
DTI-K828
DTI-K830
Loctite ® 51360
Loctite 5910
® ®
® Ultra Black 598™
Ultra Blue 587™
®
® Ultra Copper 5920™
24 690 07 Rev. B