Canon MP480 series On-Screen Manual page 82

Mc-3050-v1.00
Hide thumbs Also See for MP480 series:
Table of Contents

Advertisement

Replacing Procedure
(E) Closed correctly
(F) Not closed correctly (the cover is tilted)
Note
If the Ink Cartridge Locking Cover is not closed correctly, push down the Ink Cartridge
Locking Cover until it clicks.
Important
The machine cannot print unless both the Color and Black FINE Cartridges are installed. Be
sure to install both the FINE Cartridges.
6.
Lift the Scanning Unit (Cover) slightly to set the Scanning Unit Support back to its
original position, and gently close the Scanning Unit (Cover).
If you replaced the FINE Cartridge while printing, the machine resumes printing automatically.
Caution
When setting the Scanning Unit Support back to its original position, be sure to hold the
Scanning Unit (Cover) firmly, and be careful not to get your fingers caught.
Note
If the error message appears on the LCD after the Scanning Unit (Cover) is closed, refer to the
" in the on-screen manual: Advanced Guide .
"
Troubleshooting
When you start printing after replacing the FINE Cartridge, the machine starts cleaning the Print
Head automatically. Do not perform any other operations until the machine completes the
cleaning of the Print Head. While cleaning is in progress, the Power lamp is flashing green.
If printed ruled lines are misaligned or the print head position is misaligned, adjust the print head
position.
Aligning the Print Head
See
.
Page 82 of 681 pages
Page top

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents