Canon MP480 series On-Screen Manual page 539

Attaching to and Removing from the Printer
Note
When the Bluetooth unit is properly attached to the printer, the Power lamp on the printer
flashes twice.
Removing the Bluetooth Unit from the Printer
Remove the Bluetooth unit from the Direct Print Port of the printer in accordance with the following
procedure.
1.
Remove the Bluetooth unit from the Direct Print Port of the printer.
Caution
Make sure that the lamp on the Bluetooth unit is neither lit nor flashing before you
remove the Bluetooth unit.
Important
Store the Bluetooth unit with the cap attached.
Page 539 of 681 pages
Page top