Setting The Printer - Canon MP480 series On-Screen Manual

Setting the Printer

> About Bluetooth Communication
Advanced Guide
Setting the Printer
This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the
printer in preparation for Bluetooth printing.
The screens may differ depending on the printer you are using.
If you need more information about the Bluetooth settings, see
1.
Make sure that the Bluetooth unit is attached and the printer is turned on.
For information about how to attach the Bluetooth unit, see
.
Printer
2.
Display the Bluetooth settings screen on the LCD.
For information about how to display the Bluetooth settings screen, refer to
.
Settings on the LCD
Note
If the Bluetooth settings screen is not displayed on the LCD, the Bluetooth unit may not be
attached correctly. Remove the Bluetooth unit from the printer and attach it once again.
For details, see
If the Bluetooth settings screen still is not displayed, the Bluetooth unit may be faulty. In this
case, contact your Canon service representative.
3.
Select Device name.
The Device name screen is displayed.
4.
Check the device name.
The device name is necessary to register the printer as a Bluetooth device. Be sure to note the
device name.
Note
If multiple printer units with the same model name are connected to the system, assigning a
different device name to each printer is recommended for easy identification of the printer you
will use. See Bluetooth Settings Screen
After checking the device name, press the
> Printing Data via Bluetooth Communication
Attaching to and Removing from the Printer
.
OK button on the printer.
> Setting the Printer
.
Setting Bluetooth Printing
Attaching to and Removing from the
Changing the Machine
.
Page 544 of 681 pages