Advertisement
Quick Links
SP AF 300mm
F/2.8 LD (IF)
(Model 360EM: Minolta)
(Model 360EN: Nikon)
Thank you very much for buying this Tamron lens. The Tamron SP AF
300mm F/2.8 LD (IF) (Model 60E for Minolta, Model 360E for Nikon)
lens is a large aperture telephoto lens developed for Minolta and Nikon
AF single lens reflex cameras. Please read this instruction manual
carefully before using your lens. Proper care and maintenance of this
lens will result in years of enjoyable use.
Advertisement
Related Manuals for Tamron 360EM
Summary of Contents for Tamron 360EM
- Page 1 (Model 360EM: Minolta) (Model 360EN: Nikon) Thank you very much for buying this Tamron lens. The Tamron SP AF 300mm F/2.8 LD (IF) (Model 60E for Minolta, Model 360E for Nikon) lens is a large aperture telephoto lens developed for Minolta and Nikon AF single lens reflex cameras.
- Page 3 Focusing ring Focusing ring cover Focus range selector ring Focus range selector ring fixing screw Focus distance scale window Focus distance index Depth-of-field scale Infrared socket Tripod socket Tripod socket fixing screw Filter frame Aperture index Aperture ring Aperture scale AE (minimum aperture) lock * 12-15 for Nikon only * 3-4 are only for Model 60E (for Minolta)
- Page 4 After removing the rear lens cap from the lens, align the mount positioning point on the lens with that on the camera, and rotate the lens clockwise (counterclockwise when using Nikon model) until you hear a click, which indicates the lens being securely locked in place. There is no mount-positioning index marking on the lens to fit Nikon.
- Page 5 To install the rear filter, pull out the filter frame from the main body, change the filter (remove the normal filter and install the desired filter), and then insert it so that the TAMRON logo of the filter frame will be at the correct position. Please note if the filter is inserted upside down, the aperture blades will fail.
- Page 6 A slip-on type lens hood comes with the lens. Since the lens hood is effective for eliminating harmful rays, we recommend using it when photographing. When storing, the lens hood should be put over the lens in reverse. The lens hood is provided with two opposing lock screws. When using the hood, loosen the screw, attach the lens body to the hood, and then tighten the lock screws.