Reverb And Chorus Defaults; Piano Reset - M-Audio DCP-300 User Manual

DCP-300

Reverb and Chorus Defaults

No. Sound Name
0 Grand Piano
1 Bright Piano
2 E. Piano 1
3 E. Piano 2
4 Vibes
5 FM EP
6 Rock Organ
7 Church Organ
8 Harpsichord
9 Clav
10 Strings
11 Choir
12 Fantasia
13 Warm Pad
14 Upright Bass
15 Electric Bass
MIDI n/a
Channel 10 (Metronome)

Piano Reset

As soon as the Piano Reset function is activated (by pressing the Reverb and Chorus buttons
simultaneously), the device will perform the following functions:
1. Turn Local On
2. Send 'All Notes Off' Command on MIDI Channel 1 - external and to the internal sound engine
3. Send 'Reset All Controllers' Command on MIDI channel 1 - external and to the internal sound
engine
4. Assign Data Control to MIDI Controller 7 (Volume)
5. Set Volume levels for Main Voice, Split Voice and Layer Voice to defaults
6. Set Pan to 64 for Main Voice, Split Voice and Layer Voice
7. Turn off Layer Mode and Split Mode
8. Set Global Transmit Channel to 1
9. Set Transpose and Octave Shift both back to zero
10. Send a Bank Change MSB = 0 and Bank Change LSB = 0 on channel 1
11. Send a Program Change = 0 on channel 1
12. Send the Reverb Depth back to the default value for the Piano Voice
13. Send the Chorus Depth back to the default value for the Piano Voice
14. Send the current status of the Sustain Pedal on channel 1
The device will remain in Performance Mode during the Piano Reset function. The LCD display
will show 'Piano Reset' for 1 second and then return to the default display.
Reverb Reverb Reverb
On/Off Depth Type
On 40 4
On 40 0
On 35 1
On 38 1
On 35 4
On 50 4
On 48 1
On 96 5
On 50 0
On 35 1
On 54 4
On 127 4
On 64 4
Off 40 4
Off 35 6
Off 35 0
Off
User Guide
Chorus Chorus Chorus
On/Off Depth Type
Off 64 2
Off 50 3
On 35 2
Off 35 3
Off 40 2
On 40 2
Off 64 1
Off 50 3
Off 35 2
On 45 4
Off 35 2
Off 50 1
Off 45 1
Off 35 2
Off 35 3
On 45 1
Off
57