Using The Chorus Effect - M-Audio DCP-300 User Manual

26
DCP-300

Using the Chorus Effect

The built-in digital Chorus can be used for adding a rich, swirling stereo effect to any of the 16 voices built into
DCP-300.
‣
To apply Chorus to a voice:
CHORUS
✔
Note: Depending on the default Depth setting for the selected Chorus
preset, the effect may be quite subtle. To hear the Chorus more clearly, you
may want to increase the Chorus Depth, as described in the next step.
‣
To adjust the Chorus Depth (Chorus amount):
✔
Note: If you prefer, you may use the Tempo Up/Down
buttons instead of the Data Control knob to change the
Chorus Depth (while holding down the Chorus button).
Function
Function
CHORUS
Press the Chorus button. The button
will illuminate, and you will hear the
Chorus effect when you play the currently
selected voice.
To turn Chorus off, press the Chorus button
again. The button will go dark to indicate
that Chorus is off.
While holding the Chorus
button, turn the Data Control
knob to adjust the Chorus
Depth setting. The LCD will
show the current Chorus
Depth and Type.
Once you have the desired
amount of Chorus, let go of
the Chorus button, and resume
playing DCP-300.
User Guide